Pool Glass Fence Burlington

Custom Pool Glass Fences Built for Burlington Properties

In Burlington, an approved pool fence is required before you fill your pool with water. At Art Metal Workshop, we design custom glass pool fencing around the City’s Pool Fencing By-law from the very first sketch, creating a compliant safety barrier that complements your space.

Whether you’re fencing a backyard pool or a shared building pool, clear visibility and safety matter. Our pool fencing uses safety-rated tempered or laminated glass, with panels sized to meet Ontario Building Code requirements.

We use corrosion-resistant hardware, measure each installation to fit your yard, and assemble every glass pool fence in our own workshop.

Benefits of Pool Glass Fences for Burlington Properties

  • Watch the water from wherever you’re standing, deck, patio, or inside the house, with no picket gaps cutting the view into strips
  • Burlington’s Pool Fencing By-law is built into the design from the start, down to the height, the gap at the bottom, and the gate hardware
  • The same design reads just as naturally on an older Aldershot bungalow lot as it does on a new build closer to the water
  • Hardware and glass are selected to shrug off pool chemicals, freeze-thaw cycles, and direct sun year after year
  • More than a compliance item, it’s an upgrade that registers when the property gets valued
  • Frosted or tinted glass is available wherever you’d rather not have a direct line of sight into the yard

Pool Glass Fence Styles We Install

Frameless Glass

  • There’s nothing between the water and your eye but the glass itself; no post, no top rail
  • The panels anchor at the bottom, on standoff fittings or base shoes, with no frame running around them
  • Same safety-rated tempered or laminated glass used in the rest of our pool systems

Post-Mounted Glass

  • The structural work falls to steel or stainless steel posts positioned at regular intervals along the run
  • Because the posts do the heavy lifting, the glass panels can run slightly thinner
  • Falls between a frameless look and a fully framed one

Metal-Framed Glass

  • A metal border runs the full way around each panel
  • That border isn’t just decorative; it shares the structural load with the glass
  • Earns a second look in a yard where that’s the point, rather than blending into the background

Frosted or Tinted Glass

  • Light still reaches the yard, but you can’t see straight through to the water
  • Opacity is adjustable across several levels; your call on how private it reads
  • Goes with any of the three mounting approaches above

Glass Pool Gates

  • Shuts and locks on its own, no second step required from whoever’s walking through
  • Finish and glass type carry over from the panels it’s attached to
  • Carries the identical safety rating as the panels it connects to

Commercial Pool Glass Barriers

  • A shared pool, whether it’s at a hotel, a condo building, or a recreation centre, gets the same barrier approach as a private yard
  • Built in-house, the same shop that handles our residential orders
  • Scales up or down, one gate or a complete perimeter, without a different process

What Burlington Requires for a Pool Enclosure

Burlington’s Pool Fencing By-law sets the minimum for any enclosure around a private pool. Chain-link and solid-panel fencing must be at least 1.2 m high, while wrought iron or other metal fencing must be at least 1.5 m, with all options capped at 2.0 m. The fence must sit at least 1.2 m from the pool’s edge, and the gap between the bottom of the fence and the ground can’t exceed 100 mm. Gates need substantial hinges and a self-closing, self-latching mechanism mounted on the inside top; a thumb-latch doesn’t meet that requirement. The City requires a permit before you can build a pool, and you can’t fill it with water until the fence and gates are in place and approved. If someone fills a pool without a permit, the City can have it drained at the owner’s expense.

Why Burlington Clients Choose Us

  • Our shop has completed 12,000+ projects since opening in 2003
  • A quote comes back to you within 24 hours of getting in touch
  • You see the shop drawings before fabrication starts
  • We do every stage, from design to installation, under one roof
  • Pricing comes after, not before, a complimentary conversation about design and an in-person look at your site
  • We guarantee the workmanship on your finished fence for life

Neighbourhoods We Serve

We’ve installed pool glass fences in Aldershot, Tyandaga, Brant Hills, Headon Forest, Millcroft, and Shoreacres, among other Burlington neighbourhoods. For related work in the same areas, pool fences in Burlington and privacy glass railings in Burlington each have a dedicated page.

Frequently Asked Questions

How long should I expect to wait for a pool fence permit in Burlington?

The City of Burlington doesn’t publish a set turnaround time for pool fence permits, and wait times can run long, so apply as early as possible and confirm current timelines directly with the City.

The City can order the pool drained at your expense if you fill it without an approved fence and gates in place, and it is also an offence under the by-law.

Yes. Burlington’s permit fee schedule charges differently depending on the pool: one fee for an above-ground pool, a higher one for an in-ground or on-ground pool, and a lower one for a temporary pool.

It depends on the material. Chain-link and solid-panel fencing need at least 1.2 m, wrought iron or other metal fencing needs at least 1.5 m, and every option is capped at 2.0 m.

The glass you choose, the design, the job size, site conditions, and the finish all affect the final price. We put a number to your specific project once we’ve seen your space.